26 Chapter 3 Setting Monitor
3-3. Setting the EIZO Logo Display [Logo]
The EIZO logo appears on the display when tu rning on the monitor. This function allows you to display,
or not, the EIZO logo.
Procedure
Press to turn off the monitor.
Press holding down at least 2 seconds t o turn on the monitor.
The Optional Setting s menu appears.
Choose <Logo> from the <Optional Setti ngs> menu, and press .
Select “On” or “Off” with or , and press .
Select “Finish” with or .
Press to exit the Optional Se ttings.
The Optional Setting s menu is closed.
3-4. Setting Orientation [Orientation]
● To set the orientation of t he Adjustment menu
This function allows you to change the orient ation of the Adjustment menu when using the monitor
screen in vertical display position. (Defau lt settings : Landscape)
Procedure
Choose <Menu Settings> from the Adjustme nt menu, and press .
Choose <Orientation> from the <Menu Sett ings> menu, and press .
Select “Landscape” or “Portrait” w ith or .
Press to exit the adjust ment.
When selecting “Portrait ”, turn the monitor screen 90° in clockw ise direction.
Attention
Be sure that the cables are cor rectly connected.•
NOTE
For using the monitor with “Portr ait” position, the graph ics board supporting por trait display is requir ed. When
placing the monitor in a "Port rait" position, settings of your g raphics board need to be change d. Refer to the
manual of the graphics board for d etails.
•
1.
2.
3.
4.
5.
6.
1.
2.
3.
4.
5.