LRTZ2600
2. Specification
Model |
|
| LRTZ2600 | |
|
|
|
| |
Overall size (LxWxH) | mm | 2300 x 400 x 365 | ||
Dry weight |
| kg | 6.3 | |
Engine |
| Type |
| |
|
| Model |
| Zenoah GZ25N |
|
| Max output | rpm | 1.2Hp (0.9kW) at |
|
| Idle speed | rpm | 3000± |
|
| Displacement | cm3 | 25.4 |
|
| Fuel |
| Mixture (Gasoline 50 : Oil 1) (when using ZENOAH genuine oil) |
|
| Carburetor |
| Walbro Diaphragm type |
|
| Spark plug |
| NGK CMR7A |
Fuel tank capacity |
| L | 0.65 | |
Transmission |
|
| Centrifugal clutch, Spiral bevel gear, Cam crank | |
Reduction ratio |
|
| 4.0 | |
|
|
|
|
|
Specifications are subject to change without notice.
3.Warning labels on the machine
(1)Warning / Attention
(2)Read owner’s manual before op- erating this machine.
(3)Wear head, eye and ear protec- tion.
(4)Keep hands away from cutting blades.
If warning label peels off or becomes soiled and impossible to read, you should contact the dealer from which you purchased the product to order new labels and affix them in the required location(s).
Never modify your machine.
We won’t warrant the machine, if you use the remodeled trimmer or if you don’t observe the proper usage written in the manual.
4.Symbols on the machine
For safe operation and maintenance, symbols are carved in relief on the machine. According to these indications, please be careful not to make a mistake.
The port to refuel the “MIX GASOLINE”
Position: FUEL TANK CAP
The direction to close the choke
Position: ENGINE COVER
The direction to open the choke
Position: ENGINE COVER
