DMX PARTNER
10
1. Press and hold down the “Record“ button and simultaneously press chase buttons 1, 6, 8,1, 6, 8 in
sequence. As a result, the Record LED will illuminate. (Note: if you do not have a DMX controller
connected to the DMX input of the DMX Partner as described in the previous step, you will not
be able to access the Record mode).
2. Select show you want to edit by pressing show buttons 1 or 2. The show LED will continually flash
and the LCD will display the total amount of show steps included into the selected show- “SH:xx“.
3. To view the previously recorded steps, press the same show button, both show and record LED’s
will be lit. Use the “UP/DOWN“ buttons to scroll to the step you would like to delete. Once you find the
step, press the same show button again so that the show LED is flashing. (You must exit preview
mode before you can delete the step).
4. Press the “DELETE“ button. All eight chase LED’ s will momentarily flash and the LCD will display
the previous show step confirming that the step has been deleted.
5. Repeat steps 3 & 4 to delete additional steps.
6. Press “BLACK-OUT“ twice to exit record mode.
10c. Deleting Shows 1. Press and hold down the “Record“ button and simultaneously press chase buttons 1, 6, 8,1, 6, 8 in
sequence. As a result, the Record LED wil l illuminate. (Note: if you do not have a DMX controller
connected to the DMX input of the DMX Partner as described in the previous step, you will not
be able to access the Record mode).
2. Press and hold down the “Delete“ button, then press the show button 1 or 2 you want to delete. All
eight chase LED’s will momentarily fl ash and the show button you selected will not be lit anymore
confirming that the show has been deleted.
3. Repeat step 2 to delete additional shows.
4. Press “BLACK-OUT“ twice to exit record mode.
1. Press and hold down the “Record“ button and simultaneously press chase buttons 1, 6, 8,1, 6, 8 in
sequence. As a result, the Record LED will illuminate. (Note: if you do not have a DMX controller
connected to the DMX input of the DMX Partner as described in the previous step, you will not
be able to access the Record mode).
2. From your DMX controller, select a pre programmed strobe scene, or manually set your strobe or
shutter channel to strobe at the flash rate that you desired. (It is important that you set the scene
exactly the way you want it played back as it will override any chase or show when selec ted).
3. Press the “STROBE“ button to record and store the scene. All eight chase LED’s will flash
momentarily confirming that the strobe scene was saved.
4. To exit, press “BLACK-OUT“ twice.