DMX PARTNER
15
Section 17: Blackout Setup
This feature allows you to set your DMX Partner to activate or deactivate black out on power up.
Deactivating allows you to automatically begin playback of chases and shows on power up.
1. Flip the power switch to the “OFF“ position.
2. Press and hold the “FADE“ and “SHOW 2“ buttons simultaneously and flip the power switch to the
“ON“ position. As a result, the LCD will display “Y-BO“ or “N-BO“ depending on the current active
setting.
3. If you wish to have blackout active on power up, press the “FADE“ button so the LCD display’s “N-
BO“. If you wish to deactivated black out on power up, press the “FADE“ button so the LCD display’s
“Y-BO“.
4. To confirm your blackout setting, press the “BLACK-OUT“ button.
Section 18: Erase All Memory
Use this function only if you wish to completely erase all chases and shows currently stored in your
DMX Partner.
1. Flip the power switch to the “OFF“ position.
2. Press and hold the “RECORD“, “SPEED“, “SHOW 1“ and “BLACK-OUT“ buttons and
simultaneously flip the power switch to the “ON“ position. All memory will now be erased.