Event MH™
©Elation Professional® 33 Event MH™
- Define the number of steps in Run
With this function you can define the number of steps in the Program Run.
1. Select “STEP” by pressing [UP] or [DOWN] button
2. Press [ENTER], the display shows “S-XX”, “X” stands for the total amount of steps you
want to save, so you can call up to 48 scenes in “RUN”. For example if the “XX” is 05, it
means that “RUN” will run the first 5 scenes you saved in “EDIT”.
3. Press [ENTER] to confirm or press [MODE/ESC] to return to main menu.
- Editing the channels of the individual scenes
With this function you can edit the program to be called up in Run.
a) Editing via the Control Board
1. Select “SC01” by pressing [UP] or [DOWN] button
2. Press [ENTER], the display shows “SCXX”, “X” stands for the scene no. to be edited.
3. Change the scene no. by pressing [UP] or [DOWN] button
4. Press [ENTER], the display shows “C-X”, “X” stands for the channel no. Such as “C-01”,
it means you are editing channel 1 of the selected scene.
5. Select the channel no. you would like to edit by pressing [UP] or [DOWN] button
6. Press [ENTER] to enter editing for the selected channel, the fixture reacts to your
settings. The display shows the DMX value of the edited channel. Such as “11XX”, it
stands for in the channel 11 of the editing scene, the DMX value is XX , XX is a
hexadecimal number value “01-FF”.
7. Adjust the desired DMX value by pressing [UP] or [DOWN] button
8. Press [ENTER] in order to edit other channels of this scene.
9. Repeat steps 5-9 until you finish setting all the DMX values for all channels of this scene.
10. Once all the channels completed, the display will flash “TIME”
11. Press [ENTER] to edit the time needed, the display shows “t--X”, “X” stands for the time
needed to run the current scene, value “1-9”. For example, “t--2” means you need 2