Elation Lighting www.elationlighting.com 20
MAGE
- 99 - + 99
Coarse adjustment of the Magenta color wheel
YELL
- 99 - + 99
Coarse adjustment of the Yellow color wheel
3.10.9 Default Settings (DFSE)
DFSE
Press Enter to reset all fixture personalities (not the adjusted functions) to
the default values. On the display will appear ok to indicate that the de-
faults are set.
Function
Display
Default Settings
DMX Address
D001
D001
Pan reverse
RPAN
ON
OFF ¸
Tilt reverse
RTLT
ON
OFF ¸
Automatic lamp on
LAAU
ON
OFF ¸
Lamp on via DMX
DLOF
ON ¸
OFF
Display
DISP
D ON ¸
Cooling fan
FANS
HIGH
REG ¸
LOOF
LOHI
Feedback
FEED
ON ¸
OFF
3.10.10 Position Feedback (FEED)
FEED
The POWER WASH 575E
POWER WASH 575E is provided with a automatic position
correction (feedback) for the Pan and Tilt movement. Use the Up/Down-
keys to select ON if you want to enable the feedback function or Off if you
don't want this function. Press Enter to confirm or Mode to cancel and
return to the menu.
3.10.11 Correction of faults (EFLG)
EFLG
(Function available for authorized persons only)
3.11 Error and Information Messages
HEAt
This message appears if you try to switch on the lamp within 5
minutes after having switched off (lamp too hot). The message will
appear on the display if the lamp doesn’t ignite within 20 seconds.
The fixture will store this command and automatically ignite the lamp
after 5 minutes.