Elation Lighting www.elationlighting.com 8
1.1 Safety Instructions
The POWER WASH 575E
POWER WASH 575E is a High-Tech Product. To
guarantee a smooth operation, it is necessary to keep
following rules.
The manufacturer of this device will not take responsibility of
damages through disregard of the information in this manual.
Warranty adjustments will be cancelled.
1. Make sure before putting into operation, that the fan and the air inlets are
clean and not blocked by anything.
2. Attention: Don’t touch the device during the operation. This can cause
injuries or damages.
3. Unplug the POWER
POWER WASH
WASH 575E
575E from the AC outlet before any
attempting any service.
4. It is necessary to wait at least 30 minutes after disconnecting the AC before
you open the POWER WASH
POWER WASH 575E
575E. Please do not touch the bulb of the
lamp if you are not absolutely sure it is cold. -- Danger of BURNING --
5. Never look directly into the beam of the lamp. You risk injury of your retina
and blindness.
6. Pay attention of the maximum lamp operation time. You have to change it if
the lamp shows any deformations or damages. The same is with all glass
components, color filters, lenses and mirrors.
7. To allow a secure operation, follow also the Installation guide described in
chapter 2. Operating the POWER WASH 575E
POWER WASH 575E without suited safety aids
like Safety cables or clamps/hooks can increase the risk of an accident.
8. Installation should be done by qualified staff only. You need to pay attention
to the common rules of technology that are not explicitly mentioned in this
manual.
9. Use only original spare parts. Any structural modification will cancel all
warranty adjustments.