Elation Lighting www.elationlighting.com 26
Moveable parts
yearly
suitable fatty oil
Attention:
• Never let optical parts come into contact with oil or fat.
• Before running the fixture wait until all parts are dried up.
6.3 Cleaning the Optical System
1. Pull out the main plug!
2. Wait min. 20 minutes after the last operation to cool down the fixture.
3. Open the upper shell of the head casing by loosening the 4 Phillips screws.
Two on the front side and two on the back side of the head.
4. Do the work as explained in the list above.
5. Before you put the POWER WASH 575E
POWER WASH 575E into operation close the casing,
otherwise your retina can be hurt!
7 Technical Specification
Power supply
Power consumption
~90 - 260V, 50 - 60 Hz
780 Watt, 3.8A, electronic ballast, (blind current compensated)
Fuse protection
Lamp: T 5A, 250V, 5x20 mm (fine-wire fuse)
Electronic: T 1A, 250V, 5x20 mm (fine-wire fuse)
Lamp
Type
HTI 575-DE (OSRAM)
Live time
500h (750h)
Color temperature
5600k or 7500k
luminous flux
43.000 lm
Optical system
Glass reflector
Fresnell lens 150mm
Color
9 dichroic filter plus white plus 1x CTC 5600k, 1x CTC 3300k
Beam shape
Stepless Beam shape
Frost filter
Motor driven focus from near to far away
Zoom: Motor driven variable angle of reflected beam from 8° to 22°
Shutter / Strobe / Dimmer
Strobe- effect with variable speed 1 - 10 flashes per second
Continuously mechanical dimmer 0 - 100%
Drive