w w w . e l a t i o n l i g h t i n g . c o m

EDIT PROGRAM – Edit Scenes

Edit the scenes of the internal programs.

1.Tap MODE/ESC to access the main menu, tap UP/DOWN/LEFT/RIGHT until “Edit Program” is highlighted and tap ENTER.

2.Tap UP/DOWN until “Edit Scenes” is displayed and tap ENTER.

3.Tap UP/DOWN to select desired Scene number (“Scene 001” - “Scene 250”) and tap ENTER to confirm selection.

4.Tap UP/DOWN to select desired function (“Auto Program”, “PAN”, “PAN-Fine”, “TILT”, “TILT-Fine”, “Move Speed”, “Strobe”, “Dimmer”, “Red(1-4)”, “Green(1-4)”, “Blue(1-4)”, “White(1-4)”, “Color Macro”, “Color Preset”, “Color Mode”, “Color Patter”, “Chase Speed”, “Fade Time”, “Secne Time”, “Input By Out”) and tap ENTER to confirm selection.

5.Tap UP/DOWN to select desired position (“0-255”)and tap ENTER to confirm selection.

6.Tap MODE/ESC to return to the main menu.

EDIT PROGRAM – Record Controller

The fixture features an integrated DMX-recorder by which you can transmit the programmed scenes from your DMX-controller to the moving head. Adjust the desired scene numbers via the encoder (from – to). When you call up the scenes at your controller, they will automatically be transmitted to the moving head.

EDIT PROGRAM – Record Controller – Working With Built In Program

A Master unit can send up to 3 different data groups to the Slave units, i.e. a Master unit can start 3 different Slave units, which run 3 different programs. The Master unit sends the 3 program parts in a continuous loop.

The Slave unit receives data from the Master unit according to the group which the Slave unit was assigned to. If e.g. a Slave unit is set to “Slave 1” in the menu “Set to Slave”, the Master unit sends “Auto Program Part 1” to the Slave unit.

If set to “Slave 2”, the Slave unit receives “Auto Program Part 2”.

36

RAYZOR Q7™ User Manual 2.1