w w w . e l a t i o n l i g h t i n g . c o m

GENERAL GUIDELINES

NEVER OPEN THIS FIXTURE WHILE IN USE!

During the initial operation of this fixture, a light smoke or smell may emit from the interior of the fixture. This is a normal process and is caused by excess paint in the interior of the casing burning off from the heat associated with the lamp and will decrease gradually over time.

This fixture is a professional lighting effect designed for use on stage, in nightclubs, theatres, etc. Do not attempt installation and/or operation without proper knowledge of how to do so.

Do not permit operation by persons who are not qualified for operating this type of theatrical fixture. Most damages are the result of operations by nonprofessionals.

If this fixture is exposed to extreme temperatures due to environmental changes, do not power the fixture on until it has reached room temperature. Condensation could damage the fixture.

Consistent operational breaks may ensure the fixture will function properly for many years to come.

Do not shake fixture, avoid brute force when installing and/or operating the device.

When choosing an installation location, please be sure this fixture will not be exposed to extreme heat, moisture, and/or dust. The minimum distance between this fixture and other devices or wall and/or flat surface should be at least 0.5 meter (1.5 ft).

When using quick release “OMEGA” Cam-Locksystem, be sure the four quick lock fasteners are locked in the quick lock holes correctly.

Always install the fixture with an appropriate safety cable. When installing the fixture in a suspended environment, always use mounting hardware that is no less than M10 x 25 mm, also be sure the hardware is insert in the pre-arranged screw holes in the base of the fixture.

Please use the original packaging and materials to transport the fixture in for service.

8

RAYZOR Q7User Manual 2.1