INTRODUCTION

WARNING: THIS COOKER MUST BE EARTHED

RATING PLATE

Record the model, product and serial numbers inside the back cover of this instruction book from the rating plate. This is situated on the lower front frame of the cooker and can be seen upon opening the oven door.

The cooker must be protected by a suitably rated fuse or circuit breaker. The rating of the cooker is given on the rating plate.

INSTALLATION

If your cooker has been damaged in transit, contact your supplier immediately. DO NOT attempt to install it.

Your cooker left the factory fully packaged to protect it from damage. If it is delivered without packaging and damage has occurred, the manufacturer cannot accept responsibility. Contact your supplier for advice.

Once the packaging has been removed the cooker should only be moved by hand. DO NOT use a sack barrow or any other aid to lift the cooker as damage may occur.

Connection to the electricity supply must be carried out by a qualified electrician/competent person.

The electrical connection should be made using a double pole isolating switch (cooker socket) with at least 3mm contact separation in all poles. The cable must have conductors of sufficiently high cross-sectional area to prevent overheating and deterioration.

Six square millimetres ( 6.00mm² ) is the recommended cross-section area.

The cable should be routed away from potentially hot areas marked by an ' X' in the diagram below.

This is a type Y appliance which means it is free-standing and can be fitted with cabinets on one or both sides. It may also be fitted in a corner setting.

Side walls which are above hob level should be protected by heat resistant non-combustible material and MUST NOT be nearer than 40mm to the hob side.

A nominal air gap of 10mm at the sides of the cooker is required to enable the cooker to be moved into position.

Overhanging surfaces or a cooker hood should be a minimum of 685mm above the hob.

It is important to ensure that the appliance is level after installation. Levelling feet are fitted to the front of the appliance to accommodate uneven floors.

To move the cooker, open the oven door, and lift the cooker by holding inside the top of the oven compartment.

6

Page 7 Page 9
Page 8
Image 8
Electra Accessories 230W/I manual Introduction, Rating Plate, Installation
Page 7 Page 9

230W/I specifications

The Electra Accessories 230W/I is a standout product designed for those seeking versatility and power in their electronic devices. With a keen focus on delivering an optimal user experience, this accessory has gained popularity among both professionals and casual users alike.

One of the main features of the Electra Accessories 230W/I is its impressive power capacity. With 230 watts at its disposal, this device can handle a variety of tasks, from charging multiple gadgets to powering larger electronics. Its robust design ensures that it can sustain high performance without overheating, making it ideal for prolonged usage.

In addition to its power capabilities, the Electra Accessories 230W/I incorporates advanced technology to enhance user safety and efficiency. Equipped with intelligent power management systems, it dynamically distributes power according to the requirements of connected devices. This feature not only optimizes performance but also extends the lifespan of the devices being charged.

The sleek and compact design of the Electra Accessories 230W/I is another significant characteristic worth noting. It is lightweight and portable, which makes it an excellent choice for travel. Users can easily slip it into their carry-on bags, ensuring they have reliable power wherever they go. Its durable materials add to its resilience, allowing it to withstand the rigors of everyday use.

Moreover, the Electra Accessories 230W/I features multiple output options, catering to various devices, including laptops, tablets, and smartphones. This versatility simplifies the charging process, as users can rely on a single accessory for multiple devices, reducing clutter and enhancing efficiency.

User-friendly interfaces and indicators make the Electra Accessories 230W/I easy to operate. LED indicators display charging status, giving users peace of mind about their devices’ power levels. This accessory is designed with convenience in mind, ensuring that users can connect and disconnect devices effortlessly.

In conclusion, the Electra Accessories 230W/I stands out in the market due to its powerful capacity, advanced technologies, sleek design, and user-centric features. Whether for personal use or professional settings, it serves as a reliable companion, meeting the growing demand for efficient and versatile electronic accessories.
Top Page Image Contents