Step-by-Step Installation & Wiring
Step 1: Mount the Bracket
The mounting bracket can be installed two ways (see Figures 5 and 6), allowing optimal configurations for installations. Leave 1.5" of space between the bracket and the ceiling when installing in a corner! Attach the bracket to the wall with suitable fasteners screwed into structural members in the wall. Remember: It is the installer’s responsibility to insure that the structure can safely support the load.
Use a mimimum of four screws
Wall
Wall
Bracket | Stud |
| |
| Stud |
| Joist | |
Ceiling | Bracket | |
| Top plate | |
| Stud | |
Use a | Wall | |
mimimum of | ||
four screws | ||
|
Figure 5: Corner Installation | Figure 6: Midwall Installation |
(Top View) | (Side View) |
Step 2: Install the Safety Line
Using accepted safe rigging practices, secure one end of a suitable safety line (use cable, not chain, which will rattle) to a strong, secure point above the speaker, a point that can withstand the shock of the falling speaker. This is especially important in public spaces constructed with light gauge steel studs. Do not attach the safety line to the bracket! The safety line should prevent the speaker from falling if the bracket tears loose from the wall. Secure the other end to the eyebolt that is fully threaded into the enclosure.
3 |