Electro-Voice PA4150L, PA2400T Mains Fuse, Mains Socket, Voltage Selector, LF-connection cords

REAR PANEL

Mains Fuse

Under normal circumstance, the mains fuse blows only in the event of failure. When replacing the fuse, make sure to use a fuse of the same type with identical amperage, voltage and blow characteristics. If the mains fuse blows repeatedly, please contact an authorized service centre.

Mains Socket

Please, make sure to check whether the voltage selector is set to the correct mains voltage that matches the local mains supply at the installation site. An appropriate mains cord is included in the package.

Caution: This appliance has no user serviceable parts inside. Leave servicing to a qualified professional.

Voltage Selector

Sliding selector switch for switching between mains voltages 115V - 230V. Prior to switching the mains voltage, make sure to replace the mains fuse with an appropriate model. Please refer to the label on the rear of the enclosure indicating the correct values for different mains voltages.

LF-connection cords

Choosing balanced cables (two conductors for audio signals plus separate shielding mesh) is recommended for LF-signal connection. Although connecting unbalanced cables to the power amplifier inputs is possible as well, using balanced cables is always preferable.

A great number of today’s audio appliances provide balanced outputs carried out via XLR-type connectors. With balanced cabling, the shield interconnects all metal enclosure parts and therefore efficiently eliminates the introduction of external interference – mostly noise and hum.

Wiring examples

XLR-female	amp input
	connector

Cable to connect signal source with balanced XLR outputs.

phone jack	amp input
	connector
Cable to connect signal source with unbalanced outputs.

8