Description
Electro-Voice®SxA series powered loudspeakers are fully integrated audio systems with carefully matched electronics and transducers. These products make it easy to setup a high- quality sound system quickly with a minimum of cables and external electronics. They retain typical EV ruggedness, reliability and impeccable sound quality.
System Features – SxA Two-Way Systems
·Integrated mixer/crossover/amplifiers/speaker system with separate mic and line inputs, EQ and line-level outputs.
·Two built-in power amplifiers, one for low frequencies and one for high frequencies. The amplifiers also contain electronic crossover circuitry and CD horn compensation optimized for the speaker components a well as a limiter circuit that prevents either amplifier from clipping while preserving the sonic quality.
·The low-frequency power amplifier delivers 150 watts continuous average power and 350 watts dynamic power (IHF A). Dynamic output power is important because it determines the transient capability of the system.
·The high-frequency power amplifier delivers 50 watts continuous average power and 80 watts dynamic power (IHF A). This provides more than 3 dB of headroom over the continuous current capabilities of the high-frequency driver.
·The line input utilizes Neutrik “combo” connectors, which will accept either ¼-inch or 3- pin XLR-type connectors.
·The mic input is balanced, low-impedance 3-pin XLR-type
·The separate line output is 3-pin XLR-type balanced, low-impedance output that can be used with long cable runs.
·Two-band EQ provides tonal shaping to compensate for program material, room acoustics and personal taste.
·SxA two-way systems are perfect for use as powered floor monitors.
System Features - SxA 180 Powered Woofer
· | Integrated power amplifier, electronic crossover and low-frequency speaker designed to |
add extended bass to SxA systems | |
· | Class D amplifier with 300 watts continuous average power, 650 watts dynamic power |
(IHF-A). A built-in limiter prevents serious amplifier clipping and | minimizes the potential |
· | for speaker damage. | |
18-inch EV DL woofer with 2.5-inch voice coil for reliable low-frequency output to 38 Hz. |
· | Line input with balanced 3-pin XLR-type connector | |
· | Crossover with continuously variable low-pass frequency from 80 Hz to 120 Hz |
· | Filtered high-pass output and paralleled full-range output on balanced 3-pin XLR- |
type connectors. | |
· | Storage compartment with detachable dolly board and casters for easy transportation. The |
dolly board covers a storage compartment that holds a 34-inch pole and has ample space |
· | for cables, etc. | |
Comes with 34-inch pole for elevating any EV speaker system with 1 3/8-inch |
stand mount. | |
ELECTRO-VOICE®Owner’s Manual | 4 |
