Description

The Electro-Voice®SxA360 high powered loudspeaker is a fully integrated audio system with carefully matched electronics and transducers. This product makes it easy to setup a high-quality sound system quickly with a minimum of cables and external electronics. It retains typical EV ruggedness, reliability and impeccable sound quality.

System Features - SxA360

·Two built-in power amplifiers, one for low frequencies and one for high frequencies. The amplifiers also contain electronic crossover circuitry and CD horn compensation optimized for the speaker components a well as a limiter circuit that prevents either amplifier from clipping while preserving the sonic quality.

·The low-frequency power amplifier delivers 350 watts continuous average power.

·The high-frequency power amplifier delivers 150 watts continuous average power.

·The line input utilizes Neutrik “combo” connectors, which will accept either ¼-inch or 3-pin XLR- type connectors.

·The separate line output is 3-pin XLR-type balanced, low-impedance output that can be used with long cable runs.

·The SxA360 two-way system is perfect for use as powered floor monitors.

System Setup

To get your SxA system into operation as quickly as possible, please observe the following steps and precautions.

·Plug the 3-terminal Powercon ac cable into a grounded line receptacle. Extension cords can be used to lengthen the ac cable as necessary but make sure that they are 3-conductor 14 gauge or greater, and that are properly grounded to avoid electrical hazards and extraneous noise.

·Be sure that the SxA system is plugged into an ac power source that is capable of supplying the correct voltage. If the line voltage drops too much, the built-in amplifiers won’t be able to develop their rated power and sound quality will suffer. Under high signal conditions, the SxA amplifier section can pull 3 – 4 amps of current (120 volt models) (2 amps at 240 volts). That means that no more than 4-SxA systems should be plugged into a single 15 amp electrical service. Be cautious of what else is plugged into the same electrical service line to avoid electrical problems and poor performance.

·BEFORE TURNING THE POWER ON, MAKE SURE THAT THE LEVEL CONTROLS ARE DOWN TO AVOID TRANSIENTS OR UNEXPECTED LOUD SOUND. Turn on the power switch and ensure that the system is receiving power by monitoring the status LED. If the system is receiving signal, the LED will illuminate green.

·The SxA360 loudspeaker has narrower coverage than other compact loudspeaker systems. Its narrower coverage will help you avoid room acoustics problems by delivering the sound where the speaker is aimed. You will find that precisely aiming the speakers at the audience area away from walls will give you better sound quality.

ELECTRO-VOICE®￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

4

Page 4 Page 6
Page 5
Image 5
Electro-Voice manual Description, System Features SxA360, System Setup
Page 4 Page 6

SxA360 specifications

The Electro-Voice SxA360 is a versatile powered loudspeaker designed to deliver exceptional audio performance in various environments. Renowned for its robust construction and high-quality sound reproduction, the SxA360 is ideal for both live sound reinforcement and permanent installations. With its compact and lightweight design, it is easily transportable, making it a preferred choice for musicians, DJs, and audio professionals.

One of the standout features of the SxA360 is its integrated 360-watt class D amplifier. This powerful amplifier ensures that the speaker can deliver high levels of sound while maintaining clarity and precision across a wide frequency range. The speaker features a custom-designed 10-inch woofer that provides deep bass response, complemented by a 1-inch titanium compression driver for crisp and clear high frequencies. Together, these components offer a balanced sound that is perfect for various musical styles and applications.

The SxA360 also incorporates advanced technologies to enhance its performance. Its DSP (Digital Signal Processing) capabilities allow for precise control over the speaker’s output, including equalization, limiting, and crossover functions. This ensures optimal sound quality whether used in a small venue or a larger outdoor event. Additionally, the speaker features a unique Multi-Position design, allowing it to be used as a floor monitor or mounted on a speaker stand, providing versatility in setup configurations.

Another notable characteristic of the SxA360 is its rugged ABS enclosure, which is designed to withstand the rigors of live performance while minimizing resonance. This durable construction not only protects the internal components but also enhances sound clarity by reducing unwanted vibrations. The speaker is equipped with a built-in pole mount and multiple input options, including XLR and TRS connectors, making it easy to connect to various audio sources.

In conclusion, the Electro-Voice SxA360 delivers an impressive combination of power, versatility, and durability. With its high-performance components and advanced audio technologies, it is an excellent choice for anyone seeking professional sound quality in an array of settings. Whether for live performances, DJ sets, or as part of a larger sound system, the SxA360 stands out as a reliable and efficient audio solution that continues to impress users around the world.
Top Page Image Contents