Using SxA360’s as Floor Monitors
·The SxA360 is perfect for use as a powered floor monitor.
·The F200 adapters are necessary to convert the SxA360 into a monitor and are shipped with the speaker. To install the adapters, simply insert them into the speaker (See Figure 2 below). The F200 adapters can be easily removed by pulling in the opposite direction.
·The F200 Monitor Foot kit contains two plastic feet.
·The F200 is used with any
·Insert the feet firmly into the holes in the rear cabinet (See Figure 2).
·Remove the F200 monitor feet by pulling in the opposite direction.
Monitor Foot
Permanent Screw
Location
Figure 2:
Installing the F200 Monitor Foot on the SxA360 Speaker
CAUTION: The F200 monitor feet protrude from the enclosure. Care should be taken when moving the enclosure, since damage to the feet or enclosure might occur if the system is dropped or slid across a rough surface. It is recommended that the feet be removed for transport.
6 |