SxA360
Level adjustment knob shown
in place. Unit is shipped pre- set at 0 dB without knob installed (knob is shipped separately with your SxA360). If knob is not used, please
remember where you store it. Customer can adjust level by removing cover, pressing knob in place, and rotating to desired level.
Figure 1:
Rear Panel SxA360
Setup Diagrams for SxA360
·Plug a line input into either the ¼-inch or the 3-pin XLR-type input connector. Examples of line input sources are mixer outputs, CD/DVD players, cassette decks, VCRs, electronic keyboards, computer sound cards, etc. The ¼- inch input is in the center of the XLR connector and can accept unbalanced or balanced lines (TRS ¼-inch). The line input level required to drive the unit to full power is from – 12 dBu to 0 dBu. The system’s level control regulates the overall output level of the system.
