Electrohome 4 owner manual Using Favorite Channel Scan

15-1917.fm Page 27 Monday, July 19, 1999 12:25 PM

4.Enter the first channel’s two-digit number. (Enter a 0 before any single-digit channel number.)

5.After you enter a channel number, press

SETUP.

For example:

0 9 SETUP (for Channel 9)

1 2 SETUP (for Channel 12)

1 4 SETUP (for Channel 14)

Note: If your device requires you to press ENTER to change channels, you must press ENTER instead of SETUP after each channel you enter into the Phone Up 4’s memory.

6.Continue entering channels you want to include in your favorite channel list. After you enter the last channel number, hold down SETUP until the red light blinks twice.

Using Favorite Channel Scan

To scan through your favorite channels, press SCAN and keep the Phone Up 4 aimed at your de- vice. The Phone Up 4 scans through your select- ed channels, stopping at each for about 3 seconds.

The Phone Up 4 stops scanning after it reaches the last channel stored in favorite channel scan memory. To stop scanning earlier, simply press any key on the Phone Up 4.

Need help? Call 1-800-950-7044

27