Electrohome 4 owner manual Using Device Codes

15-1917.fm Page 36 Monday, July 19, 1999 12:25 PM

Repeat Steps 1-4 to search other devices that you have loaded codes for from your telephone.

5. To quit fast search, press SETUP.

Note: You can search up to 11 codes for each de- vice (TV, VCR, and so on) provided 11 codes were loaded.

USING DEVICE CODES

If you know a specific device code for your device, you can enter it directly into your Phone Up 4. Specific device codes are provided in the table that starts on Page 37.

Note: You can determine the specific device code that is already loaded into your Phone Up 4 by following the steps in “Determining the 4-Digit Code” on Page 11.

Follow these steps to enter a specific device code.

1.Turn on the device you want to control.

2.Press the desired device key (TV, VCR, or

CABLE).

3.Press and hold SETUP until the red light blinks twice.

4.Press 9 8 4. the red light blinks twice again, indicating the Phone Up 4 is ready to accept a device code.

5.Enter the desired 4-digit device code.

For example, to assign device code 0165 to your TV button, press

TV SETUP 9 8 4 0 1 6 5

When the red light blinks twice again, the Phone Up 4 has accepted the code.

Need help? Call 1-800-950-7044

36