At the end of the programme

The machine stops automatically and a flashing zero is displayed.
The END pilot light stays on.
If the RINSE HOLD option has been selected, the corresponding pilot
light on the programme progress display stays onto indicate that the
water must be emptied out before opening the door.
The pilot light of the START button flashes and a zero is displayed.
At the end of the programme (after draining), a flashing zero will
appear on the display.
Switch the machine off by pressing the ON/OFF button.
Turn the programme selector dial to RESET.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid a subsequent wash being
damaged by any forgotten items.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas-
ant smells.
How to dry

Drying only

Warning! Do not exceed the maximum laundry loads:
- 2.25 kg for linen and cottons
- 1.5 kg for easy-cares.
The water tap must be open and the drain hose must be positioned in
the sink or connected to the drain pipe.
Depress the ON/OFF button to switch the machine on.
Select the drying programme (for cotton or easy-cares).
Depress the DRYING TIME button until the time you
want appears in the display.
Press the START/PAUSE button to start the programme.
At the end of the cycle, turn the programme selector
dial to RESET and press the ON/OFF button again to
switch the appliance off.
Remove the laundry.
DRYING
TIME
2.15
30
How to wash
132998930.qxd 6/22/01 2:57 AM Pagina 30 (Nero/Process Black pellicola)