Electrolux 137064300 B Removing Hinge from Front Panel, Removing Door Lock from Front Panel

Reversing Door 13

C)Removing Hinge from Front Panel

1With the hinge in open position, remove 2 short, course-thread, panhead screws on hinge plate.

2Remove 3 short, fine-thread, counter-sunk screws in hinge side.

3Slide the hinge toward the center of the front panel, and then pivot the hinge inward while slowly pulling it away from the front panel to expose the attached harness.

4Lift up on the tab and the release harness from the retainer, allowing the harness to lay outside the front panel.

D)Removing Door Lock from Front Panel

1Remove 2 short, course-thread, panhead screws from the door lock.

2Slide the lock toward the outer edge of the front panel. Pivot the lock slightly outward while slowly pulling it through opening to expose the attached harness.

WARNING

ELECTRICAL SHOCK HAZARD

Failure to disconnect power source before servicing could result in personal injury or even death.

3Release the harness from the terminal with the small lever on back of the lock. Separate the harness from the lock, allowing the harness to lay outside the front panel.