Operating Instructions 13
OPERATING YOUR WASHER, continued
7. Start the washer.
Close the door and press start. The washer will not operate with the door unlatched and DOOR OPEN will be displayed.
Select delay start to delay the beginning of the cycle for up to 22 hours if desired.
As a safety measure, the door will automati-
cally lock and remained locked during the entire wash cycle and DOOR LOCKED will be
displayed.
To add a forgotten item to the washer any time during the wash portion of the cycle, press pause. When the door unlocks, open the door, add the item, close the door and press start to resume the cycle.
To change the cycle once the cycle has begun, press cancel, select a new cycle, and press start again. Just turning the cycle selector knob will not change the cycle.
To change settings or options after the cycle has begun, press pause, select the new set- tings or options, and press start again.
NOTE
If the cycle is interrupted during spin, the door lock will not release until the tub has stopped spinning. DO NOT force open the door.
To stop the cycle, press cancel.
When the cycle ends, a signal will sound, COMPLETE - DOOR CAN BE OPENED will
be displayed and the drum light will come on.
Remove items from the wash drum when the cycle ends and place in dryer, line dry or dry flat as directed on the fabric care label.
Excess wrinkling, color transfer or odors may develop in items left in the washer after the cycle has ended if not removed promptly.
CAUTION
ENTRAPMENT and TIP-OVER HAZARD
An open door could entice children to hang on the door or crawl inside the washer. If there are no small children present, you may leave the door ajar to prevent mildew and odor build up.
For best results
Follow the fabric care label instructions on items to be washed.
