19
Care & Cleaning
Inside Routine Cleaning (Preventive)
REMOVE “LIQUID ONLY”
DISPENSER CUP
“MAIN WASH”
COMPARTMENT
IMPORTANT
Items left in washer while performing the SYSTEM
CLEAN cycle will cause a severe out-of-balance
situation that could damage the washing machine.
NOTE
If the SYSTEM CLEAN cycle is cancelled or
paused during the cycle, the washer will go
through 2 rinse cycles to clean the drum of any
residual bleach before unlocking the door.
TO REFRESH OR CLEAN INSIDE OF WASHER
To clean and freshen the washer, perform the
SYSTEM CLEAN cycle. For best results use the
SYSTEM CLEAN cycle once a month. To begin the
cycle, press select when prompted during auto-
mated reminder mode or manually select the cycle
by following these directions:
1. Wake up the washer by pressing any button, ro-
tate cycle knob to cycle “A” (indicated to right),
press the start button and then the cancel
button.
2. Wake up the washer again by pressing any
button, then immediately and simultaneously
press and hold both button “1” and button “2”
(indicated to right) for 5 seconds, or until the
LCD display changes.
To help prevent odors, mold or mildew, leave the
door open for a few hours after use or whenever
the washer is not in use.
WARNING
HARMFUL VAPOR HAZARD
Do not use or mix liquid chlorine bleach with other
household chemicals such as toilet cleaners, rust
removers, acid or products containing ammonia.
These mixtures can produce dangerous fumes
which can cause serious injury or death.
CAUTION

ENTRAPMENT and TIP-OVER HAZARD

An open door could entice children to hang on
the door or crawl inside the washer. If there are
no small children present, you may leave the
door ajar to prevent mildew and odor build up.
If installed, remove the “MAIN WASH - LIQUID
ONLY” cup from the dispenser. REMOVE ALL
ITEMS FROM WASH DRUM before fi lling the “MAIN
WASH” detergent chamber with one (1) cup of liquid
chlorine bleach OR one (1) pouch of TIDE® WASH-
ING MACHINE CLEANER. DO NOT use both. Press
start to begin.
CYCLE A
BUTTON 1
BUTTON 2
Immediately follow up with a spin only
cycle. Select fresh rinse on max spin
speed with no detergent or bleach to help clear
any residual bleach left after the SYSTEM
CLEAN cycle.
For best results