How to wash
Starting the programme
To start the selected programme, press the START/PAUSE button; the corresponding light stops flashing.
START
PAUSE
The pilot light corresponding to the wash phase which is running is illuminated.
If the delay start option has been selected, the
machine starts its countdown, in hours, which will appear on the dis- play. During this period it is possible to load other laundry: press the START/ PAUSE button. Open the door. Load the laundry. Close the door and press the START/ PAUSE button again.
At the end of the programme
The machine stops automatically and a flashing zero is displayed. The END pilot light stays on.
If the RINSE HOLD option has been selected, the corresponding pilot light on the programme progress display remains lit to indicate that the water must be emptied out before opening the door.
The pilot light of the START/PAUSE button flashes and a zero is dis- played.
At the end of the programme (after draining), a flashing zero is dis- played.
Turn the programme selector dial to RESET.
Switch the machine off by pressing the ON/OFF button.
Remove the laundry from the drum.
Check that the drum is empty so as to avoid a subsequent wash being damaged by any forgotten items.
Close the water tap.
Leave the door open to prevent the formation of mildew and unpleas- ant smells.
25
