What to do if ...
Symptom |
| Possible Cause |
| Remedy |
|
|
|
|
|
All the lights in the tem- perature display are flash- ing.
There is a malfunction.
Inform your local Service Force Centre. Do not open the door of the appliance any more.
Appliance cools too much.
The food is too warm.
Interior lighting does not work.
Heavy build up of frost, possibly also on the door seal.
Temperature is set too cold.
Temperature is not proper- ly adjusted.
Door was open for an extended period.
A large quantity of warm food was placed in the appliance within the last 24 hours.
The appliance is near a heat source.
Light bulb is defective.
Door seal is not air tight (possibly after reversing the door).
Press „+“ (WARMER) but- ton.
Please look in the “Starting up and Temperatur regula- tion” section.
Open the door only as long as necessary.
Press COOLMATIC and/orFROSTMATIC button.
Please look in the “Installation location” section.
Please look in the “Changing the light bulb” section.
Carefully warm the leaking sections of the door seal with a hair dryer (on a cool setting). At the same time shape the warmed door seal by hand such that it sits correctly.
|
| Appliance is not level. |
| Readjust the feet. |
Unusual noises. |
|
|
|
|
|
|
|
| |
| The appliance is touching |
| Move the appliance | |
|
|
| ||
|
| the wall or other objects. |
| slightly. |
|
|
|
|
|
|
|
|
|
|
The compressor does not |
|
|
|
|
start immediately after |
|
|
|
|
pressing the COOLMATIC |
| This is normal, no error has |
| The compressor starts after |
or FROSTMATIC button, or |
| occurred. |
| a period of time. |
after changing the tem- |
|
|
|
|
perature setting. |
|
|
|
|
|
|
|
|
|
24