Washing cycle complete/Removing the washing

At the end of the programme PLEASE TAKE OUT THE CLOTHES appears in the display. As soon as the § symbol appears, the door can be opened.

1.Open the door using the handle.

2.Remove the washing.

3.Close the water tap.

4.Switch off the appliance.

If Rinse Hold has been selected:

1. Press the START key.

 

 

 

 

DELICATES 30°C

 

 

 

RINSE HOLD

11:28-11:28

 

 

 

START

§

 

 

 

RINSE HOLD

 

 

 

 

 

 

 

 

######################

 

 

 

RINSE H.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

The display automatically changes to the first programme page. Depending upon the programme that has been running either SPIN or SHORT SPIN is highlight- ed.

 

 

SHORT SPIN

 

 

 

1200 RPM

12:28-12:34

 

 

 

START

ú

 

 

 

 

 

 

 

EASY IRON

 

 

 

 

REFRESH

 

 

 

 

 

 

 

1200

FASHION

 

 

 

 

SHORT SPIN)

 

 

 

 

 

 

 

OPTIONS

SPIN

 

 

 

 

 

 

If spinning or draining is required:

 

 

 

Use the control knob to

 

 

 

 

 

 

SPIN

 

highlight either

 

 

 

 

1200 RPM

11:28-11:39

 

– SPIN or

 

START

ú

 

 

 

– DRAIN.

 

 

FASHION

 

 

 

 

SHORT SPIN

 

2. Reduce the spin speed, if

 

1200

SPIN)

 

 

 

 

 

STARCH

 

 

OPTIONS

DRAIN

 

necessary. The spin speed

 

 

 

 

 

 

cannot be increased. This

 

 

 

protects the fabric.

 

 

 

3.Press the START key.

The washing is spun or the water is drained.

3 If OVERDOSING is shown in the display at the end of a wash cycle, too much detergent was used in the completed wash programme. Please take note of the dosage instructions provided by the detergent manufacturer and the amount of washing loaded the next time you wash.

21