Washing cycle complete/Removing the washing
At the end of the programme PLEASE TAKE OUT THE CLOTHES appears in the display. As soon as the 
§ symbol appears, the door can be opened.
1.Open the door using the handle.
2.Remove the washing.
3.Close the water tap.
4.Switch off the appliance.
If Rinse Hold has been selected:
1.Press the START key.
DELICATES 30°C | |
RINSE HOLD | |
START | § |
| RINSE HOLD |
| ###################### |
RINSE H. |
|
The display automatically changes to the first pro- gramme page. Depending upon the programme that has been running either SPIN or SHORT SPIN is highlight- ed.
SHORT SPIN
1200 RPM |
START | ú |
| EASY IRON |
| REFRESH |
1200 | FASHION |
| SHORT SPIN) |
OPTIONS | SPIN |
If spinning or draining is required: |
|
| |
Use the control knob to |
| SPIN | |
highlight either |
| ||
1200 RPM | |||
– SPIN or | START | ú | |
– DRAIN. |
| FASHION | |
|
| ||
|
| SHORT SPIN | |
2. Reduce the spin speed, if | 1200 | SPIN) | |
| STARCH | ||
OPTIONS | DRAIN | ||
necessary. The spin speed | |||
|
| ||
cannot be increased. This |
|
| |
protects the fabric. |
|
|
3.Press the START key.
The washing is spun or the water is drained.
3 If OVERDOSING is shown in the display at the end of a wash cycle, too much detergent was used in the completed wash programme. Please take note of the dosage instructions provided by the detergent manu- facturer and the amount of washing loaded the next time you wash.
21
