Electrolux 16820 Installation, Unpacking, Remove the polystyrene block from, Two plastic bags

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

Using		a	spanner,
unscrew and remove
the	2	rear		bottom
screws. Slide out the
2 plastic			pins. Lay
the machine on its
back, taking care not
to squash the hoses.
This can be avoided					P1129			P0001
by	placing			one of
the	corner			packing	pieces	between	the	1
machine and the floor.

Remove the polystyrene block from the 2

bottom of the machine and release the

two plastic bags. 3

Carefully slide out the left-hand bag

removing it towards the right and then P1124 downwards.

Slide out the right-hand bag removing it towards the left and then upwards.

The bottom cover		2
plate, which can
be found inside
the machine with
the instruction
book, will now		1	A
need to be fitted.
Hook the bottom
of the plate 'A',	P1204		P1205

into position first. Then push the other end of the plate into position.

Important!

You can find more detailed instructions regarding the bottom cover assemblig in its relative bag.

50