Description of the appliance
•When the programme has finished, a steadily lit zero is displayed.
•Delayed start, (23 hours max.) programmed using the special button. The countdown is updated every hour.
•Alarm code indicating a fault in the machine operation (see page 38).
Programme progress display
By selecting the wash programme, the pilot lights corre- sponding to the various phases making up the programme come on.
After the machine has started, only the running phase pilot light stays on. When the programme has finished, the END pilot light comes on.
WASH
RINSE
RINSE +
SPIN
DRYING
END
OVER DOSING
DOOR
When the programme has finished, if the OVER DOSING light comes on, it indicates that too much detergent has been used or that the drain fil- ter is blocked.
Cancelling a programme
To cancel a programme which is running, turn the programme selector dial to the O/OFF position.
Warning! After a programme which ends with water in the drum (RINSE HOLD option), turn the selector dial first to O and then to the DRAIN, SPIN or DELICATE SPIN programme.
Altering a programme which is running
To alter a programme, first set the machine to PAUSE by pressing the START/PAUSE button.
Any function can be modified before the machine starts it. After select- ing the new option press the START/PAUSE button again to
To modify the selected programme turn the programme selector dial to O/OFF and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but- ton again the machine restarts with the newly selected programme.
15
