Electrolux 16830 manual Problem, Possible cause

Models: 16830

1 56
Download 56 pages 59.12 Kb
Page 39
Image 39
Problem

Something not working?

Problem

Possible cause

Solution

The machine does not work

The machine does not fill

The machine fills then empties immediately

The machine does not empty and/or does not spin

The main electrical fuse or

Replace the fuse.

the fuse in the plug has

 

blown.

 

The door is not properly

Close the door; the click

closed (E40).

of the lock should be heard.

The plug is not connected.

Insert the plug.

The START button has not

Press the button.

been pressed.

 

The DELAYED START

Check the selected delay on

option has been selected.

the display.

The water tap is closed (E10).

Open the water tap.

The water inlet hose is

Check the whole length of the

squashed or kinked (E10).

hose and remove the kink.

The small filter of the water

Clean the filter.

inlet hose is clogged (E10).

 

The door is not properly

Close the door.

closed (E40).

 

The end of the drain hose

Place the hose at the right

is too low.

height (see Installation

 

section).

The drain hose is

Check the whole length of

squashed or kinked (E20).

the hose and remove the

 

kink.

The drain pump or the

Clean the pump or check

drain hose are clogged (E20). the hose.

The RINSE HOLD option

Empty out the water by

(stop with water in drum)

selecting the DRAIN or

has been selected.

SPIN programme.

The laundry is not evenly

Redistribute the laundry

distributed inside the drum.

manually in the drum.

39

Page 39
Image 39
Electrolux 16830 manual Problem, Possible cause