Installation, Unpacking | Electrolux 16830 manual

Installation

Unpacking

All transit bolts and packing must be removed before using the appliance.

Using the supplied spanner, unscrew

and remove the 2 rear bottom screws.

Slide out the 2 plas-

tic pins. Lay the machine on its back, taking care not to

squash the hoses. P1129 This can be avoided

by placing one of the corner packing pieces between the machine and the floor.

Remove the polystyrene block from the bottom of the machine and release the two plastic bags.

Carefully slide out the left-hand bag removing it towards the right and then downwards.

P0001

1 2

3

P1124

Slide out the right-hand bag removing it towards the left and then upwards.

The bottom cover		2
plate, which can		2
be found inside
the machine with
the instruction
book, will now		1	A
need to be fitted.		1
Hook the bottom
of the plate 'A',	P1204		P1205
of the plate 'A',

into position first. Then push the other end of the plate into position.

Important!

You can find more detailed instructions regarding the bottom cover assemblig in its relative bag.

50

Image 50

Electrolux 16830 manual Installation, Unpacking

Contents

Lavamat Turbo Dear customer Contents Programme charts wash and special programmes Automatic washing and drying NON-STOP programmePage Installation Safety instructionsGeneral safety Child safety During use Packaging materials DisposalTips for environmental protection Machine Main features of your washer-dryer Description of the appliance Front view Control panel Programme selector dial Position Cold = cold wash Programme Option buttonsPosition 40C Easy iron Pause START/PAUSE buttonStart Drying Time button Delay Timer buttonElectronic Drying button Display Altering a programme which is running Cancelling a programmeProgramme progress display Opening the door after the programme has started Detergent dispenser drawer Before the first wash Preparing the wash cycle Sorting out and preparing the laundry Cotton Sort of laundry Approximate Dry weightsTypes of fabric and care labels Synthetics Delicates 40 Detergents and additives Which detergent? Which form? Traditional Powders Garments not suitable for drying Preparing the drying cycleLoad Sort of laundry Modification of the drying time or degree of drying Drying symbols on garment labelsDuration of the drying cycle Fibre residue Load the laundry How to washMax. load Add detergent and additive Selection of the desired wash programme Selection of the desired options Selection of the Delay Timer option Selection of the Rinse + extra rinse option Starting the programme At the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying only Max. load Programme chart Wash programmes Max Consumption Tion Special programmesDescrip Max. load Spin speed Drying time Timed DryingDegree of drying 900 Consumption data for timed drying Max Water Energy Duration Load Litres KWh Periodical cleaning Exterior Cleaning and maintenanceMaintenance Wash After each wash Door seal Drain pump Water inlet filter Emergency emptying out Something not working? Frost precautionsTroubleshooting Problem Possible cause Water inlet hose is Problem Possible cause Solution Distributed E10 Foam is still visible even after the last rinse Unsatisfactory washing resultsIf grey stains remain on the laundry White residue is left on the laundry Technical data This appliance complies with the following EC directives 08705 929 Service & Spare PartsService & Spare Parts Help us to help you Customer care Standard Guarantee Conditions Exclusions European Guarantee Instructions for installation and electrical connection Safety instructions for the installer Rear view Dimensions of the applianceFront view and side view Installation Unpacking Levelling Installation on a suspended floorPositioning Do not connect to a hot water supply Water inlet cold water connection onlyWater drainage Into a drainage standpipe Onto a sink outlet spigot Interest of the environment Electrical connections Permanent connection Electrolux plc