Electrolux 316520002 manual Setting self-clean Setting delayed self-clean, Example

Self-Clean 51

Setting self-clean Setting delayed self-clean

The clean feature provides 3 different choices for self-cleaning the upper oven. Set the clean for lite (2 hrs), med (3 hrs) or heavy soils (4 hrs). The example below shows setting the upper oven for self-clean to begin immediately using a medium (3 hour) setting.

Example

Step Press

1. Remove racks and Press UPPER OVEN

2. Press CLEAN

3. Select MED or

select lite or heavy

4. Press START

After pressing start, the motorized oven door latch will automatically lock the door. The DOOR lock icon will flash -Fig. 1. Once the door has locked the DOOR lock icon will remain on through the entire self-clean cycle.

After self-clean, the oven may take about 30-40 minutes to cool and unlock. A Hot message -Fig. 2- will display during this period. After cooling the DOOR lock icon will flash and disappear indicating that the door has unlocked.

Fig. 1 Fig. 2

You may wish to set your appliance to perform a self-clean cycle sometime later (up to 12 hours later). The END TIME key will determine when the cleaning will stop.

You will need to set the END TIME out far enough to allow for the type of clean cycle you choose (2-3- 4 hours). Remember to add 30-40 additional minutes for the oven to cool enough and the oven door to unlock.

The example below shows setting the upper oven for a lite (2 hour) self-clean cycle to end at 8:00 o’clock.

Example

Step Press

1. Remove racks and Press UPPER OVEN

2. Press CLEAN

3. Select LITE

4. Press COOK OPTIONS

5. Press END TIME

6. Enter 800

7. Press START

IMPORTANT

•If a self-clean cycle was started but did not finish due to a power failure, your oven may not be completely cleaned. After power has been restored and the oven door has unlocked, set for another self-clean if needed.

NOTES

•You may press CANCEL any time during the cleaning process. After cancelling the self- clean cycle, do not attempt to open the oven door until the DOOR lock icon turns off.

•If you desire to set a delayed self-clean cycle to end in 12-24 hours, use the USER PREF key to set the 12hr energy saving mode (ES) to OFF and also set the clock mode (CLO) to 24 hr.