Using the Timer
6
CD receiver
Remote
Turn MULTI JOG to set the On time of the timer operation.
You can also use the number buttons on the remote controller.
controller
When the desired time is displayed, press MULTI JOG.
For example, to set 7:29, press 10/0, 7, 2, then 9.
Notes:
•When you set the On time, the Off time is automatically set to one hour later.
•During timer recording, the first few seconds may not be recorded. Set the On time to one minute earlier.
7
CD receiver
Remote
Turn MULTI JOG to set the Off time for the timer operation.
When the desired time is displayed, press MULTI JOG.
controller
Timer setting indication
TIMER 1
A square appears if | Selected |
the Timer Rec opera- | timer |
tion is programmed. | number |
8
CD receiver
Remote
Turn MULTI JOG to set the volume.
The default value for the volume is 20. After selecting the desired volume, press MULTI
controller
JOG to confirm the current value.
9
CD receiver
Remote
Place the unit in Standby mode.
Press STANDBY/ON to place the unit in Standby mode.
controller
Notes:
•Even if you set Memory, Random, or 1GR mode for timer playback, the CD receiver will perform normal playback at the timer On time.
•If the unit is not in Standby mode, the programmed timer operation will not start at the timer on time. Be sure to place the unit in Standby mode to activate timer operation.
•If you try to set the Sleep timer or press TIMER during timer operation, the current timer setting is cancelled.
•The volume level during the Timer Play operation is set to the level programmed prior to placing the unit in Standby mode. Adjust the volume level as necessary before placing the unit in Standby mode.
•During the Timer Rec operation, the muting function is activated and the audio level is minimized. To listen to the audio being recorded, press MUTING on the remote controller.
To reprogram the timers, press EDIT/NO/CLEAR and follow the procedure from the beginning.
51