Sierra S5832SG Programming With an Alpha Keypad, Programming With an Icon Keypad

Programming With an Alpha Keypad

Upon entering the installer programming mode, the display will ask you which language you wish to use for program- ming the panel. Each panel supports three languages, one of which is English. The other languages are determined by the model number of the panel. The Alphanumeric keypad provides two panel programming options: Quick or Menu programming. Both options use a combination of text and numbers in the LCD display.

Figure 19

Selecting the Language on the Alphanumeric Keypad

Once a valid installer code has been entered, the installer has the option of using either the Quick or Menu Program- ming mode to enter data into the panel. Each method is explained below.

Figure 20

Selecting the Programming Mode with the Alphanumeric Keypad

Quick Programming Mode

Using the Quick Programming mode, you can easily go directly to any Cmd Loc (Blocks 1 - 10 only; the Installer Commands, Block 0, are not available in Quick program- ming mode). This allows you to view or edit any of the data programmed into the panel.

The Alphanumeric display will show the Block Number (1

-10) and Programmed Data (varies by location) on the top line of the display, with the Command Location (var- ies by Block) shown on the bottom line.

Figure 21

Reading Programming Data on the Alphanumeric Keypad

The [Bypass], [Home], and [Cancel] keys are used to move between fields and to edit the data in each field, as outlined previously.

Menu Programming Mode

The Menu Programming mode uses menu options and descriptions to guide you easily through the panel pro- gramming. You can scroll through the Blocks by press- ing the [Bypass] key or go directly to any Block by press- ing the desired key (0 - 10), followed by the [Home] key.

The same three keys ([Bypass], [Home], and [Cancel]) are used in the Menu Programming mode, with slight variations.

Programming With an Alpha Keypad (cont.)

Key	Function
[Bypass]	Used to scroll through the different Menu op-
	tions and levels.
[Home]	If the PRG> prompt is displayed, this key will
	write the data currently displayed to memory
	and increment to the next program position.
	If the Menu has additional options in sub-
	menus, this key will move to the next sub-
	menu.
[Cancel]	Cancel the operation, if the data has not been
	written to memory. If you are in a sub-menu,
	this key will back up one level.

CAUTION: Pressing and holding the Cancel key for 2 seconds will Exit Programming Mode.

Programming With an Icon Keypad

The display on the keypad consists of a 3-digit display for showing numbers (Blocks, Cmd Locs, and Data) and fixed text for indicating the type of data displayed.

Figure 22

Reading Command Location on the Icon Keypad

Figure 23

Displaying Block Data on the Icon Keypad

Data will be displayed using only the digits required.

Figure 24

Viewing Program Data on the Icon Keypad

The [Bypass], [Home], and [Cancel] keys are used to move between fields and to edit the data in each field, as outlined previously.

10