Sierra S5832SG installation instructions Block 5 - Reporting Digits Programming cont

Report Code, Restoral (Zones 1 - 32)

Zones:	1 - 8	9 - 16	17 - 24	25 - 32
Cmd Loc	065	066	067	068
Default	1	1	1	1
Range	0 - 15	0 - 15	0 - 15	0 - 15

Block 5 - Reporting Digits Programming (cont.)

Comments

The restoral report code is a single-digit code. For 2-digit reporting for- mats, the relative zone number (1 - 8) is sent as the second digit. Disable the reporting by programming 0 into the specific Cmd Loc. Disabling a Cmd Loc disables reporting for all zones associated with that location.

Report Code, Zone Bypass (Zones 1 - 32)					Comments
Zones:	1 - 8	9 - 16	17 - 24	25 - 32	The zone bypass report code is a single-digit code. For two-digit reporting
Cmd Loc	069	070	071	072	formats, the relative zone number (1 - 8) is sent as the second digit. Disable
Default	1	1	1	1	this report by programming 0 into the specific Cmd Loc. Disabling a Cmd
Range	0 - 15	0 - 15	0 - 15	0 - 15	Loc disables reporting for all zones associated with that location.
Report Code, Trouble (Zones 1 - 32)					Comments

Zones:	1 - 8	9 - 16	17 - 24	25 - 32
Cmd Loc	073	074	075	076
Default	1	1	1	1
Range	0 - 15	0 - 15	0 - 15	0 - 15

The zone trouble report code is a single-digit code. For two-digit reporting formats, the relative zone number (1 - 8) is sent as the second digit. Disable the reporting by programming 0 into the specific Cmd Loc. Disabling a Cmd Loc disables reporting for all zones associated with that location.

Report Code, Tamper (Zones 1 - 32)
Zones:	1 - 8	9 - 16	17 - 24	25 - 32
Cmd Loc	077	078	079	080
Default	1	1	1	1
Range	0 - 15	0 - 15	0 - 15	0 - 15

Comments

The zone tamper report code is also a single-digit code. For two-digit reporting formats, the relative zone number (1 - 8) is sent as the second digit. Program the specific Cmd Loc with 0 to disable reporting. Disabling a Cmd Loc disables reporting for all zones associated with that location.

Report Code, Soft Zone (Medical)

Key: Medical

Cmd Loc	081 - 082
Default	0	1
Range	0 - 15

Comments

This is the code sent to the central station when the Medical soft zone is activated from the keypad. Disable reporting by programming 00 into these Cmd Loc.

Report Code, Soft Zone (Medical) Restoral

Key: Medical

Cmd Loc	083 - 084
Default	0	1
Range	0 - 15

Comments

This is the code sent to the central station when the user enters a valid user code following a keypad-activated Medical emergency. Disable reporting by programming 00 into these Cmd Loc.

Report Code, Soft Zone (Police)

Key: Police

Cmd Loc	085 - 086
Default	0	1
Range	0 - 15

Comments

This is the code sent to the central station when the Police soft zone is activated from the keypad. Disable reporting by programming 00 into these Cmd Loc.

Report Code, Soft Zone (Police) Restoral

Key:	Police
Cmd Loc	087 - 088
Default	0	1
Range	0 - 15

Comments

This is the code sent to the central station when the user enters a valid user code following a keypad-activated Police emergency. Disable reporting by programming 00 into these Cmd Loc.

Report Code, Soft Zone (Fire)

Key:	Fire
Cmd Loc	089 - 090
Default	0	1
Range	0 - 15

Comments

This is the code sent to the central station when the Fire soft zone is acti- vated from the keypad. Disable the reporting by programming 00 into these Cmd Loc.

Report Code, Soft Zone (Fire) Restoral

Key:	Fire
Cmd Loc	091 - 092
Default	0	1
Range	0 - 15

Comments

This is the code sent to the central station when the user enters a valid user code following a keypad-activated Fire emergency. Disable reporting by programming 00 into these Cmd Loc.

Report Code, Duress			Comments
Cmd Loc	093 - 094		This is the code sent to the central station when the user enters a duress
Default	0	1	code. (See Block 3, CL 041 to determine when the duress code is active.)
Range	0 - 15		If the system is divided into areas, the area associated with the duress code
			will be identified by the account number (see Block 4, CL 005 - 052).
			Disable the reporting by programming 00 into the specified Cmd Loc.

26