Sierra S5832SG installation instructions Block 4 Digital Communicator Programming

Home Arm Reports Enable Comments Options:

Cmd Loc

Default

Range

054

1

1 - 2

This option, when enabled, allows opening/closing and by-	1	No
pass reports to be sent to the central station, if programmed	2	Yes

in Block 1, CL 021 - 080 (User Code Privilege) and Block 5, CL 069 - 072 (Zone Bypass Reports); CL 095 - 098 (Open- ing Reports); and/or CL 099 - 102 (Closing Reports).

Block 4 - Digital Communicator Programming

This Block is divided into 164 Command Locations (CL 001 - 164). The programming locations in this Block reflect the Receiver Type and Message Format for Receivers 1 & 2, Account Numbers, Phone Numbers (Receiver 1, 2, and RPS), Dialing Parameters and Delays, and Call Routing (including SpreadNet).

Receiver Type (Receiver #1)		Options:		9	Radionics / Fast
Cmd Loc	001	1	ADEMCO 4+2 Express (DTMF)
Default	2	2	ADEMCO Contact ID (DTMF)	10	Radionics / Slow
Range	1 - 15	3	ADEMCO High Speed (DTMF)	11	Silent Knight / ADEMCO Fast
		4	SIA Level 1 (FSK)	12	Silent Knight / ADEMCO Slow
		5	SIA (Date and Time)	13	Radionics High Speed
		6	SIA (Area)	14	Numeric DTMF Pager (4+2)
		7	SIA (Date & Time + Area)	15	Personal Dialing
		8	CFSK-IV (FSK)

NOTE: ADEMCO High Speed (option #3) may not be used with systems having more than 8 zones.

Message Format (Receiver #1)

Cmd Loc	002
Default	1
Range	1 - 4

Comments	Options:
Specifies the method of sending the	1	3/1 Dual Round
	2	4/1 Dual Round
reported message (Account Num-
	3	4/2 Dual Round
ber and Reporting Code) to the
	4	3/1 Extended Dual Round
Central Station.

NOTE: The 4/1 Message Format may not be used with Radionics High Speed.

Receiver Type (Receiver #2)		Options:		8	CFSK-IV (FSK)
Cmd Loc	003	1	ADEMCO 4+2 Express (DTMF)	9	Radionics / Fast
Default	2	2	ADEMCO Contact ID (DTMF)	10	Radionics / Slow
Range	1 - 15	3	ADEMCO High Speed (DTMF)	11	Silent Knight / ADEMCO Fast
		4	SIA Level 1 (FSK)	12	Silent Knight / ADEMCO Slow
		5	SIA (Date and Time)	13	Radionics High Speed
		6	SIA (Area)	14	Numeric DTMF Pager (4+2)
		7	SIA (Date & Time + Area)	15	Personal Dialing

NOTE: ADEMCO High Speed (option #3) may not be used with systems having more than 8 zones.

Message Format (Receiver #2)		Comments
Cmd Loc	004	Specifies the method of sending the re-
Default	1	ported message (account number and
Range	1 - 4	reporting code) to the central station.

Options:

13/1 Dual Round

2 4/1 Dual Round

3 4/2 Dual Round

4 3/1 Extended Dual Round

NOTE: The 4/1 Message Format may not be used with Radionics High Speed.

Account #1

Cmd Loc	005	006	007	008	009	010
Default	0	0	0	0	0	0
Range	0 - 15	0 - 15	0 - 15	0 - 15	0 - 15	0 - 15

Comments

This is a 6-digit account number which is used by Receiver 1. In a partitioned system, this is the account number for area #1.

Account #2

Cmd Loc	011	012	013	014	015	016
Default	0	0	0	0	0	0
Range	0 - 15	0 - 15	0 - 15	0 - 15	0 - 15	0 - 15

Comments

This is a 6-digit account number which is used by Receiver 2. In a partitioned system, this is the account number for area #2.

21