Symantec Essential Commands for SCSP with Critical System Protection's Agent Config Tool

104

Migrating to the latest version

Migrating legacy installations of Symantec Critical System Protection

	Table 5-1lists the management server-related agent config tool commands:
	Table 5-1	Agent config tool commands
Command	Syntax		Description
-host	Windows: sisipsconfig -host		Set the IP address or fully qualified host name of
	primary[,alternate1,alternate2,...]		the primary management server and optional
	UNIX: sisipsconfig.sh –host		alternate management servers used by the agent.
	primary[,alternate1,alternate2,...]		The list of management servers must comprise the
			primary management server, which is always the
			first server in the list. The remaining optional
			servers in the list are considered alternate servers.
			You may specify any number of optional alternate
			management servers.
			The management server list that you specify will
			replace the current management server list used by
			the agent. You cannot reorder or edit an existing
			management server list.
			The management server host names or IP
			addresses configured for a single agent must be
			Tomcat servers that talk to a single Symantec
			Critical System Protection database. Using
			multiple databases can result in unexpected agent
			behavior.
			The management servers must use the same server
			certificate and agent port.
-failbackinterval	Windows: sisipsconfig		Set the fail back interval, in minutes, for the agent
	-failbackinterval num_mins		to try to communicate with the primary
	UNIX: sisipsconfig.sh		management server.
	-failbackinterval num_mins		Once an agent fails away from the first (primary)
	num_mins = number of minutes		server in the management server list, the agent
			periodically checks if the first server is back. The
	Default: 60 minutes
			agent uses a fail back interval to determine when to
			perform this server check.
-view	Windows: sisipsconfig -view		Display all values that are configurable through
	UNIX: sisipsconfig.sh -view		the agent config tool. The configurable values
			include the management server list and fail back
			interval.