Symantec Critical System manual Copying files required for the policy conversion utility

110

Migrating to the latest version

Preparing for detection policy migration

Installing the authoring environment and policy conversion utility

The Symantec Critical System Protection authoring environment and the policy conversion utility were automatically installed during management console installation. No separate installation is required.

See “Installing and configuring the management console” on page 48.

Copying files required for the policy conversion utility

When you installed the management console and authoring environment, you also installed the policy conversion utility, ITAHIDSpolicyMigration.exe, and four files that the conversion utility requires. All files were installed in the following directory:

C:/Program Files/Symantec/Critical System Protection/Console

The four required files are as follows:

■xerces-c_2_5_0.dll

■zlib1.dll

■msvcr71.dll

■msvcp71.dll

Computers that run Windows 2000 require all four files, and computers that run Windows XP/2003 require xerces-c_2_5_0.dll and zlib1.dll only. The other two files are automatically installed with Windows XP/2003.

Note: If you plan to run the policy conversion utility from the \Console directory, you do not need to copy files.

To copy files required for the policy conversion utility

◆Do one of the following:

Copy the required files to the directory where you will run the policy conversion utility. You can run the policy conversion utility from this directory only.

Copy the required files to a system folder like \WinNT or \WinNT\System32. You can run the policy conversion utility from any directory.