Symantec Critical System manual Unix agent installation settings

76 Installing UNIX agents

About installing UNIX agents

Table 4-1	UNIX agent installation settings
Setting		Default	Description
Common Config		none	The name of an existing common
Group			configuration group for this agent to join.
			You use common configuration groups to
			apply communication and event logging
			parameters to agents.
			An agent is placed in the default common
			configuration group, unless you specify
			another configuration group that already
			exists in the management console.
			After installation, you can change the
			group assignment using the management
			console.
Prevention Config		none	The name of an existing prevention
Group			configuration group for this agent to join.
			You use prevention configuration groups to
			apply log rules to agents.
			An agent is placed in the default prevention
			configuration group, unless you specify
			another configuration group that already
			exists in the management console.
			After installation, you can change the
			group assignment using the management
			console.
Prevention Policy		none	The name of an existing prevention policy
Group			group for this agent to join.
			You use prevention policy groups to apply
			prevention policies to agents.
			An agent is placed in the default prevention
			policy group, unless you specify another
			policy group that already exists in the
			management console.
			After installation, you can change the
			group assignment using the management
			console.