Symantec Critical System manual Microsoft Windows Installer commands, System Critical Protection

60

Installing Symantec Critical System Protection on Windows

Unattended agent installation

3Type and run one of the following commands:

agent.exe ? or

agent-windows-nt.exe ?

Microsoft Windows Installer commands

See the Microsoft documentation for information about standard Microsoft

Windows Installer commands and additional logging levels.

Table 3-5describes the optional basic commands that are used for installations.

	Table 3-5		Optional Installer commands
Command		Default		Description
/qn		none		Install silently
-l*v+! <log filename>		none		Log all events except for the v argument (*), create a
				verbose log file (v), append to the existing log file (+),
				flush each line to the log (!), to a file named <log
				filename> that either exists or is created.
				If the path includes spaces, use quotation marks.
INSTALLDIR=<path>		C:\Program Files\Symantec		Designate a custom path on the target computer where
		\Critical System Protection		<path> is the specified target directory.
		\Agent		If the path includes spaces, use quotation marks. Escape
				the internal quotation marks, as in the following
				example:
				agent-windows-nt.exe /s /v”INSTALLDIR=\"E:
				\Program Files\....Symantec
				\System Critical Protection
				\Agent\" -l*v+! c:\agent-install.log /qn”
REBOOT=<val>		Based on operating system		Whether or not to restart a computer after installation,
				where <val> is a valid argument.
				Valid arguments are as follows:
				■ Suppress (prevents most restarts)
				■ ReallySuppress (prevents all restarts as part of the
				installation process)
				Note: The Force argument is not supported.