Symantec Critical System manual Posix

74Installing UNIX agents

About installing UNIX agents

■If you are installing a Solaris, Linux, HP-UX, AIX, or Tru64 agent on a system that supports non-English character sets, the destination directory that you choose for the agent must contain only ASCII characters. If you include any non-ASCII characters in the path, the installation will fail.

Table 4-1describes the agent installation settings.

Table 4-1	UNIX agent installation settings
Setting		Default	Description
Installation		/opt/Symantec	The Installation directory prefix for the
Directory			<prefix dir>/scspagent subdirectory.
Logs File Directory		/var/log	The installation directory prefix for the
			<prefix dir>/scsplogs subdirectory.
Primary		127.0.0.1	The IP address or fully qualified host name
Management Server			of the primary management server that will
			manage the agent.
Alternate		none	A comma-separated list of alternate
Management			management servers. For each alternate
Servers			management server, specify the IP address
			or fully qualified host name.
			Optional
			See “About simple failover” on page 25.
Management Server		/tmp/agent-cert.ssl	The directory location of the SSL certificate
Certificate			file, agent-cert.ssl, obtained from the
			Symantec Critical System Protection
			management server installation directory.
			You must copy this file from the
			management server to the specified
			location before starting the installation.
			All primary and alternate management
			servers must use the same certificate file.
			Required
Agent Name		Host name of agent	The name of the agent computer.
		computer	After installation, you can change the agent
			name through the management console.
Agent Locale		POSIX®	Symantec Critical System Protection agent
			locale setting.