Symantec Critical System manual To configure the management console

50Installing Symantec Critical System Protection on Windows

Installing and configuring the management console

	Table 3-3	Management console configuration settings
Setting	Default	Description
Admin port	8081	The Web server Administration Port number that was used during
		management server installation.
		See Table 3-2, “Management server installation settings,” on page 38.
		See Table 3-1, “Port number mapping,” on page 32.
Use encrypted	Enabled	Select this check box to use Secure Sockets Layer (SSL) X.509
communications		certificate-based channel encryption for Symantec Critical System
		Protection.
		SSL X.509 certificate-based channel encryption secures communication
		between the management console and the management server, and
		between the agent and the management server.
		If you feel that your system provides adequate firewall security and you
		do not want to use SSL X.509 certificate-based channel encryption for
		Symantec Critical System Protection, clear this check box. If you clear
		this check box, you must edit the server.xml file, found on the
		management server, in the <Server_Install_Root>\tomcat\conf
		directory. See the Symantec Critical System Protection Administration
		Guide for instructions on editing server.xml.
Password	none	The password that is associated with the symadmin user name, which
		you create the first time you start the management console.

To configure the management console

1Click Start > Programs > Symantec Critical System Protection > Management Console.

2In the Login window, click the green plus sign.

3In the New Server Configuration panel, replace New Server with the name that you want to use to identify your server.

4In the New Server Configuration panel, specify the server configuration parameters, and then click OK.

5In the Login window, type symadmin in the User name box, select the new server that you added, and then click Login.

6In the Verify Server Certificate panel, select Always accept this certificate, and then click OK.

7In the Set Password panel, in the Password and Confirm Password boxes, type the password to associate with the symadmin user name, type the password again to confirm, and then click OK.