Symantec Critical System manual Installing an agent in silent mode

80

Installing UNIX agents

Installing an agent in silent mode

Table 4-2describes the settings that are used with the installation commands.

Table 4-2	UNIX agent installation settings
Setting		Default	Description
-help		none	You can run the installer with the –help
			switch to get a list of all the switches.
-version		none	Displays the installation package version
			information. Installation does not occur.
-silent		Interactive	Installs silently without user prompts.
			Uses default settings if they are not set
			by installation options.
			Required
-reboot		No reboot	Initiates an automatic restart after
			installation completes if intrusion
			prevention is enabled after installation.
-server=<addr>		127.0.0.1	The management server IP address or
			fully qualified host name.
			Required
-altservers=		none	A comma-separated list of alternate
<server1,server2,...>			management servers. For each alternate
			management server, specify the IP
			address or fully qualified host name.
			Optional
			See “About simple failover” on page 25.
-prefix=<dir>		/opt/Symantec	The installation directory prefix for the
			<prefix dir>/scspagent subdirectory.
-logdir=<dir>		/var/log/scsplog	The installation directory prefix for the
			<prefix dir>/scsplog subdirectory. If the
			directory does not exist, it is created.