Installing Symantec Critical System Protection on Windows
Installing and configuring the management console
49
C:/Program Files/Symantec/Critical System Protection/Console
Management console installation does not prompt you to enter port numbers or server names. You enter this information after installation.
To install the management console
1On the installation CD,
2In the initial installation panel, click Next.
3In the License Agreement panel, select I accept the terms in the license agreement, and then click Next.
4In the Destination Folder panel, change the folder if necessary, and then click Next.
The installation directory name must contain printable ASCII characters only.
5In the Ready to Install the Program panel, click Install.
6When the InstallShield Wizard Completed panel appears, click Finish.
Configuring the management console
Configuration prompts you to enter a series of values consisting of port numbers, passwords, and a server name. In a few instances, the port numbers must match the port numbers that were specified during management server installation.
Table
| Table | Management console configuration settings |
|
|
|
Setting | Default | Description |
|
|
|
Server name | Localhost Server | The name of the management server that you want to manage from the |
|
| management console. |
|
| This value is used for user interface identification purposes only, and |
|
| appears on the Login window. The name can be any value. |
|
|
|
Host | local host | The IP address or fully qualified host name of the management server |
|
| computer that you want to manage from the management console. |
|
|
|
Port | 4443 | The Console Port number that was used during management server |
|
| installation. |
|
| See Table |
|
| See Table |
|
|
|
