Sierra S5832SG Exit Delay Terminator, Timer Units On Board Relay, Timer Count On Board Relay

Exit Delay Terminator

Cmd Loc 012

Default 1

Range 1 - 2

Block 7 - Auxiliary Devices Programming (cont.)

Comments	Options:
If enabled, jumps to the last 5 seconds of the exit delay,
	1	No
then arms the system. Requires a normally open switch
	2	Yes
connected to keypad (TXD and C terminals).

Timer Units (On Board Relay)

Cmd Loc 013

Default 2

Range 1 - 5

Timer Count (On Board Relay)

Cmd Loc	014
Default	30
Range	1 - 255

Timer Units (REMM #1, Relay #1)

Cmd Loc 015

Default 2

Range 1 - 5

Timer Count (REMM #1, Relay #1)

Cmd Loc	016
Default	30
Range	1 - 255

Timer Units (REMM #1, Relay #2)

Cmd Loc 017

Default 2

Range 1 - 5

Timer Count (REMM #1, Relay #2)

Cmd Loc 018

Default 30

Range 1 - 255

Timer Units (REMM #1, Relay #3)

Cmd Loc 019

Default 2

Range 1 - 5

Timer Count (REMM #1, Relay #3)

Cmd Loc	020
Default	30
Range	1 - 255

Timer Units (REMM #1, Relay #4)

Cmd Loc 021

Default 2

Range 1 - 5

Timer Count (REMM #1, Relay #4)

Cmd Loc	022
Default	30
Range	1 - 255

Timer Units (REMM #1, Relay #5)

Cmd Loc 023

Default 2

Range 1 - 5

Timer Count (REMM #1, Relay #5)

Cmd Loc	024
Default	30
Range	1 - 255

Comments	Options:
Each relay has its own independent countdown timer.	1	Latched
The timer consists of two parts: the Units and the Counter.	2	Seconds
The countdown timer determines the amount of time a	3	Minutes
relay will remain closed. For the On-Board Relay, CL 013	4	Hours
stores the units, while CL 014 stores the starting count.	5	Days
The timer will count backwards and when it reaches 0,
the respective relay will open.

NOTE: The timer function is ignored if the Relay option (Block 7, CL 001 -

011)is programmed for SpreadNet Arming/Disarming (option #5), Listen-In Trigger (option #9), Follows Keypad Sounder (option #10), Relay Status #1 (option #67), Relay Status #2 (option #68), 3-second Toggle for Audible Shutoff (option #72), or 3-second Toggle for Local Bell Test (option #73).

Comments

For REMM #1, Relay #1, CL 015 stores the units, while CL 016 stores the starting count. The timer will count backwards and when it reaches 0, the respective relay will open.

Comments

For REMM #1, Relay #2, CL 017 stores the units, while CL 018 stores the starting count. The timer will count backwards and when it reaches 0, the respective relay will open.

Comments

For REMM #1, Relay #3, CL 019 stores the units, while CL 020 stores the starting count. The timer will count backwards and when it reaches 0, the respective relay will open.

Comments

For REMM #1, Relay #4, CL 021 stores the units, while CL 022 stores the starting count. The timer will count backwards and when it reaches 0, the respective relay will open.

Comments

For REMM #1, Relay #5, CL 023 stores the units, while CL 024 stores the starting count. The timer will count backwards and when it reaches 0, the respective relay will open.

32