Sierra S5832SG Report Code, Primary Phone Line Restoral, Report Code, Secondary Phone Line Cut

Report Code, Primary Phone Line Restoral

Cmd Loc	129	130
Default	0	0
Range	0 - 15	(All Locations)

Block 5 - Reporting Digits Programming (cont.)

Comments

These two-digit codes are sent when the system detects a primary or secondary phone line cut, or their respective restorals. When using single- digit reporting formats, only the second digit is sent.

Report Code, Secondary Phone Line Cut

Cmd Loc	131	132
Default	0	0
Range	0 - 15	(All	Locations)

Report Code, Secondary Phone Line Restoral

Cmd Loc	133	134
Default	0	0
Range	0 - 15	(All Locations)

Report Code, Installer Programming Start

Cmd Loc	135	136
Default	0	0
Range	0 - 15	(All Locations)

Comments

This two-digit report code will be sent to indicate the start of installer pro- gramming. Single-digit reporting formats will only send the second digit to the central station.

Report Code, Installer Programming Complete

Cmd Loc	137	138
Default	0	1
Range	0 - 15	(All Locations)

Report Code, Bell Supervision Trouble			Comments
Cmd Loc	139	140	These two-digit report codes will be sent to indicate an external bell super-
Default	0	0	vision trouble condition or a restoral report. When using single-digit report-
Range	0 - 15	(All Locations)	ing formats, only the second digit will be sent.
Report Code, Bell Supervision Trouble Restoral
Cmd Loc	141	142
Default	0	0
Range	0 - 15	(All Locations)

Report Code, SpreadNet Supervisory Trouble

Zones:	1 - 8	9 - 16	17 - 24	25 - 32
Cmd Loc	143	144	145	146
Default	1	1	1	1
Range	0 - 15	0 - 15	0 - 15	0 - 15

Comments

The SpreadNet supervisory trouble and supervisory trouble restoral re- port codes are single-digit codes. For two-digit reporting formats, the relative zone number (1 - 8) is sent as the second digit. Program the specific Cmd Loc with 0 to disable reporting. Disabling a Cmd Loc dis- ables reporting for all zones associated with that location.

Report Code, SN Supervisory Trouble Restoral

Zones:	1 - 8	9 - 16	17 - 24	25 - 32
Cmd Loc	147	148	149	150
Default	1	1	1	1
Range	0 - 15	0 - 15	0 - 15	0 - 15

Report Code, SN Transmitter Low Battery Zones: 1 - 8 9 - 16 17 - 24 25 - 32

Cmd Loc	151	152	153	154
Default	1	1	1	1
Range	0 - 15	0 - 15	0 - 15	0 - 15

Report Code, SN Tx Low Battery Restoral Zones: 1 - 8 9 - 16 17 - 24 25 - 32

Cmd Loc	155	156	157	158
Default	1	1	1	1
Range	0 - 15	0 - 15	0 - 15	0 - 15

Comments

The SpreadNet low battery and low battery restoral report codes are a single-digit code. For two-digit reporting formats, the relative zone number (1 - 8) is sent as the second digit. Program the specific Cmd Loc with 0 to disable reporting. Disabling a Cmd Loc disables reporting for all zones associated with that location.

Report Code, Ground Fault

Cmd Loc	159	160
Default	0	0
Range	0 - 15	(All	CL)

Comments

These two-digit report codes will be sent to indicate a ground fault condi- tion or restoral report. When using single-digit reporting formats, only the second digit will be sent.

Report Code, Ground Fault Restoral

Cmd Loc

Default

Range

161	162
0	0
0 - 15	(All CL)

28