Sierra S5832SG Block 1 - Code Option Programming cont, Block 2 - Zone Configuration Programming

Block 1 - Code Option Programming (cont.)

User Code Privileges (User # 1 - 60)										Comments			Options:
Cmd Loc		021	022	023	024	025	026	027	028	These programming Options determine which			0	Limited Functions**
User #		1	2	3	4	5	6	7	8	Options the user is authorized to perform.			1	Disarm
Cmd Loc		029	030	031	032	033	034	035	036	Some user codes may have alternate func-			2	Arm
User #		9	10	11	12	13	14	15	16	tions. (See Block 9 - Partition Programming			4	Bypass
Cmd Loc		037	038	039	040	041	042	043	044	in the Sierra Reference Manual for additional			8	Open/Close Rpt
User #		17	18	19	20	21	22	23	24	information.)
Cmd Loc		045	046	047	048	049	050	051	052				16	Lang. Code opt. 1
User #		25	26	27	28	29	30	31	32		Language	Program Value	32	Lang. Code opt. 2
Cmd Loc		053	054	055	056	057	058	059	060
											English	0
User #		33	34	35	36	37	38	39	40
											Spanish	16
Cmd Loc		061	062	063	064	065	066	067	068
User #		41	42	43	44	45	46	47	48		Italian	32
Cmd Loc		069	070	071	072	073	074	075	076
User #		49	50	51	52	53	54	55	56			** Limited Functions are user number specific.
Cmd Loc		077	078	079	080							They may include relay operation, restricted
User #		57	58	59	60							SN device operation, and some end-user
Default		15 (All CL)										functions.
Range	0 - 47 (All CL)

Block 2 - Zone Configuration Programming

Block 2 is divided into 160 Command Locations (CL 001 - 160) which are used to program the characteristics of each of the zones in the control panel. The features include Delay Times, Zone Type, Zone Restoral Type, Zone Response Time, Audible Cadence, Circuit Type, Chime Enable, Shunt Enable, and Home Arm Shunt List. The soft zone programming uses CL 155 - 160.

Entry Delay #1

Cmd Loc	001
Default	20
Range	10 - 255 (Seconds)

Comments

This establishes the first of two delay times for entry zones. Time is entered in seconds.

Entry Delay #2

Cmd Loc	002
Default	40
Range	10 - 255 (Seconds)

Comments

This establishes the second of two delay times for entry zones. Time is entered in seconds.

Exit Delay

Cmd Loc	003
Default	60
Range	20 - 255 (Seconds)

Comments

This establishes the delay time for exit zones. The time programmed into this location should allow the user to use the exit farthest from the keypad. Time is entered in seconds.

Zone Type (Zones 1 - 32)

Cmd Loc	004		005	006	007	008	009	010	011
Zone #	1		2	3	4	5	6	7	8
Default	1		3	3	5	5	5	5	10
Cmd Loc	012		013	014	015	016	017	018	019
Zone #	9		10	11	12	13	14	15	16
Cmd Loc	020		021	022	023	024	025	026	027
Zone #	17		18	19	20	21	22	23	24
Cmd Loc	028		029	030	031	032	033	034	035
Zone #	25		26	27	28	29	30	31	32
Default	0	(CL 012 - 035)
Range	0 - 15 (All CL)

Comments	Options:
These programming	0	Disabled	8	Day Bell/Inst
Options determine the	1	Entry Delay 1/Exit	9	Day Bell/Delay
zone type for each zone	2	Entry Delay 2/Exit	10	24-Hr. BA
(hardwired or wireless)	3	Interior Instant	11	Fire (FA)
in the system.	4	Interior Delay 2	12	Tamper
	5	Instant (Perim.)	13	Panic/Hold-Up
	6	Day Buzzer/Inst	14	Emergency-Med

7Day Buzzer/Delay 15 Keyswitch **

**If the Zone Type is programmed as Keyswitch, then Zone Restoral Type (Block 2, CL 036 - 067) will be programmed using Option #2 values.

Zone Restoral Type (Zones 1 - 32)

Cmd Loc	036	037	038	039	040	041	042	043
Zone #	1	2	3	4	5	6	7	8
Cmd Loc	044	045	046	047	048	049	050	051
Zone #	9	10	11	12	13	14	15	16
Cmd Loc	052	053	054	055	056	057	058	059
Zone #	17	18	19	20	21	22	23	24
Cmd Loc	060	061	062	063	064	065	066	067
Zone #	25	26	27	28	29	30	31	32
Default	2 (All CL)
Range	1 - 5 (All CL)

Comments

Option #1 values are used for all zone types except Keyswitch.

Keyswitch zones will use the second set of Options. Default value for keyswitch is 2 (Arm/Disarm).

Option Set #1		Option Set #2
1	Disabled	1	Disabled
2	Return to normal	2	Arm/Disarm
3	Return to normal	3	Arm Only
	and bell silenced	4	Disarm Only
4	Return to normal	5	N/A
	and not armed

5User code entry (zone may remain faulted)

14