HearthStone Quality Home Heating Products Inc Champlain Model #8300
19
• 30’ maximum system height (with or without offsets-note shutter setting)
• 10’ maximum offset (refer to Figures 8 – 10 shutter setting)
• maximum rise to run = 1 to 5 (refer to Figures 8 – 10 note shutter setting)
• termination must fall within the area outlined by the shaded area shown in Figure 8 and the
chart in Figure 9 should be considered as well.
DV CLASS A CHIMNEY SYSTEMS (4)
- Chimney Conversion Kit A
- Chimney Conversion Kit B
- Chimney Conversion Kit C
- Masonry Chimney Conversion Kit
• Co-Linear Flex Liner (10ft min/30ft max)
• Co-Linear Flex Connector
• High Wind Termination Cap
DV CHIMNEY CO-LINER SYSTEM
• Chimney Liner Termination Kit (includes Co-Liner to Co-Axial Termination and Flashing)
• (2) Sections 3” Flex Liners (10ft min/30ft max)
• High Wind Termination Cap
• Co-Axial to Co-Linear Appliance Connector
• (4) 3-1/2” Hose Clamps
DV CHIMNEY CO-AXIAL LINER SYSTEM
• Chimney Liner Termination Kit (includes Co-Linear to Co-Axial Termination and
Flashing
(2) Sections 3” Flex Liners (10ft min/30ft max)
• High Wind Termination Cap
• Co-Axial to Co-Linear Appliance Connector
• (4) 3-1/2” Hose Clamps
The use of an existing chimney as an air intake is not covered under the ANSI Z21.88-CSA
2.33-M98 test methods and the resulting ITS/WHI product certification. The Authority
having jurisdiction must be consulted prior to proceeding with these installation methods.