HearthStone Quality Home Heating Products Inc

CHAMPLAIN Gas-Fired Direct Vent

Complete the cleaning procedure by carefully placing the log set within the firebox as described in the Log Set Information section of this manual. Fasten the front façade on. Turn on the gas, light the unit and check for proper operation. Flame patterns should look like Figure 18. Regularly check to insure the area around the Champlain is kept free and clear from combustible materials, gasoline, and other flammable vapors and liquids. Check that the flow of combustion and ventilation air is not obstructed.

Once a year the unit and its venting system should be inspected by a qualified service technician to ensure that it is clean, free of obstruction, safe, and in good working order. If service or maintenance is required, a qualified service technician should perform it.

CLEANING THE GLASS

If operating on propane, it may be necessary to clean the inside of the glass occasionally. Do not use abrasive cleaners, steel wool, or a razor blade. Scratching the glass will weaken the integrity of the glass. Your dealer will usually stock a gas fireplace glass cleaner or a window cleaning fluid will work adequately. Do not clean when hot!

WARNING: Do not operate this appliance with the glass panel removed, cracked or broken. A licensed or qualified service technician should do replacement of the glass assembly. Contact your authorized dealer for replacement glass.

NOTE: If the vent-air system is disassembled for any reason, re-install per the instructions provided in the Venting

section

of

this

manual

35

Page 35
Image 35
Hearth and Home Technologies 8300 owner manual Cleaning the Glass