HearthStone Quality Home Heating Products Inc | Champlain Model #8300 |
4.Gently place the Middle Log (2) in the firebox against the front of the Rear Log. There are slots on the underside that fit in between the burner tube and into the burner tube holder. The rear tabs on the Middle Log should touch the front of the Rear Log, and the log should be centered as best as possible.
5.Place the Ember Screen (3) on the front of the burner tube with the long side of the Screen on the tube. The short tab should be facing forward on the bottom of the firebox.
6.Gently place the Front Log (4) in the firebox against the front of the burner tube. Center as best as possible.
7.Spread evenly across the Ember Screen, the Charcoal Embers (5).
8.Gently place the Top Log (6) in the firebox on top of the Middle Log. The Middle Log has 2 posts, which slide into the 2 holes on the underside of the Top Log. The “leg” on the Top Log points towards the rear.
9.With logs in place, place the glass and frame back on the firebox. Slide the clips down securing the glass to the firebox.
10.Grasp the cast façade and slide the top edge under the lip of the top castings. Push the bottom of the façade in towards the firebox. While pushing in, pull the latch down to secure the façade to the firebox.
To Equipment
Inlet
Nipple
Gas Supply
Inlet
TeeFitting
3" MIN.
Cap
Sediment Trap
29
